Safety switch TP with door monitoring contact
- Auxiliary release on the front
- Escape release from the rear
- With door monitoring contact
- Increased horizontal overtravel
- With LED function display
Açıklama
Approach direction
Horizontal and vertical
Can be adjusted in 90° steps
Increased overtravel for horizontal approach direction
Solenoid operating voltage
- AC/DC 24 V +10%, -15%
LED function display
A function display (2 LEDs, red and green) is available for the following voltage range:
- AC/DC 24 V +10%, -15%
Guard locking type
TP3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
Switching element
4131 | Slow-action switching contact 2 NC + 1 NO + 1 NO (door monitoring contact) |
Auxiliary release
This is used for releasing the guard locking with the aid of a tool. To protect against tampering, the auxiliary release is sealed with sealing lacquer.
Escape release (C1993, long actuator shaft)
This is used for manual release of guard locking from the danger zone without tools. With identification of On/Off position.
Functional drawings
Door monitoring | |
Solenoid monitoring |
Functional drawings
Dimensional drawings
1) | Escape release, basic position |
2) | Auxiliary release |
3) | Locking screw |
4) | Escape release, unlocked position |
Teknik Veriler
Approvals
Electrical connection values
Power consumption | 8 W |
Connection cross section | 0.34 ... 1.5 mm² |
Display module | |
AC/DC | 24 V -15% ... +10% |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 2.5 kV |
Utilization category | |
DC-13 | 4 A 24 V |
AC-15 | 4 A 50 V |
Short circuit protection according to IEC 60269-1 | 4A gG |
Solenoid duty cycle | 100 % |
Switching voltage | |
min. at 10 mA | 12 V |
Switching current | |
min. at 24 V | 1 mA |
thermal rated current Ith | 4 A |
Mechanical values and environment
Approach direction | A |
Connection type | |
3 x | M20 x 1.5 |
Number of door position NO contacts | 1 |
Number of guard lock monitoring NO contacts | 1 |
Number of guard lock monitoring positively driven contacts | 2 |
Actuating force | 10 N |
Installation orientation | any |
Mechanical life | 1 x 10⁶ |
Switching principle | Slow-action switching contact |
Degree of protection | IP67 |
Material | |
Contact | Silver alloy, gold flashed |
Housing | Reinforced thermoplastic |
Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of the guard position | 3x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V | ||
Monitoring of guard locking | 3x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
PL | Maximum SIL | Category | Mission time | |
---|---|---|---|---|
Control of guard locking | Depending on external control of guard locking | 20 y |
Miscellaneous
C number | |
C1993 | Escape release long |
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Mode d’emploi Interrupteur de sécurité TP…
Manual de instrucciones Interruptor de seguridad TP…
Betriebsanleitung Sicherheitsschalter TP…
Diğer Belgeler
Sipariş verileri
Sip. No. | 115066 |
Makale adı | TP3-4131A024L024MC1993 |
Ağırlık | 0,547kg |
Gümrük sınıfı | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |