AnasayfaProductsSafety engineering for connection to IO-LinkBP/BR safety switch without guard lockingCES-I-BR-M-C07-SA-156233
Non-contact safety switches CES-I-BR-.-C07, M12
- Safety switch with integrated evaluation electronics
- Several devices can be connected in series, max. 20
- Multicode
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Monitoring output OD
- Diagnostic information via BR/IO-Link Gateway GWY-CB or ESM-CB
- Three active faces
- Plug connector M12, 8-pin (aligned)
- Switch chains up to 200 m long
Açıklama
Installation position
Permissible installation position
Industry 4.0 ready
The switch can communicate in combination with an EUCHNER BR IO-Link Gateway, and sends process and device data to higher-level control systems. Comprehensive diagnostic messages enable rapid and targeted troubleshooting.
Multicode evaluation
Every suitable actuator is detected by the switch.
Category according to EN 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN 13849-1
Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Terminal assignment
| Pin | Designation | Function |
|---|---|---|
| 1 | FI1B | Enable input for channel B |
| 2 | UB | Power supply, DC 24 V |
| 3 | FO1A | Safety output, channel A |
| 4 | FO1B | Safety output, channel B |
| 5 | OD/C | Monitoring output/communication |
| 6 | FI1A | Enable input for channel A |
| 7 | 0 V | Ground, DC 0 V |
| 8 | nc | n.c. |
Notice
The caps for the mounting holes are included.
Dimensional drawings
| 1 | LEDs |
| 2 | Active face |
| 3 | With the installation orientation shown: cable outlet on left or right |
Connection examples
Teknik Veriler
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| rated conditional short-circuit current | 100 A |
| Rated insulation voltage Ui | 300 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 100 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 125 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 10 ms |
| Safety class | III |
| Current consumption | 40 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OD/C | |
| Output type | p-switching, short circuit-proof |
| Output voltage | UB-1.5 ... UB V DC |
| Switching current | 1 ... 50 mA |
| Safety outputs FO1A / FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| HIGH U(FO1A) / U(FO1B) | UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | 1 ... 150 mA |
| Test pulse duration | 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm) |
| Test pulse interval | ca 100 ms |
Mechanical values and environment
| Dimensions | 40 x 26.5 x 18 |
| Connection type | M12 plug connector, 8-pin |
| Tightening torque | max. 0.8 Nm |
| Ready delay | 5 s |
| Operating altitude | max. 4 000 m |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Mounting distance | |
| between switches | min. 50 mm |
| Mounting type | non-flush on metal |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | |
| with UB = 24 V DC | -25 ... +55 °C (+65 °C at IL= max. 10 mA per safety output) |
| Material | |
| Housing | Plastic, PBT-PC-GF30 |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | 3 | 6x10-10 | 4 | 20 y |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
| Additional feature | Caps included |
In combination with actuator CES-A-BTN-C07-156230
| Switch-on distance | |
| Installation position C + D | 7 mm |
| Installation position A + B | 13 mm |
| Secured switch-off distance sar | |
| in x direction/installation position A + B | max. 20 mm |
| in x direction/installation position C + D | max. 17 mm |
| Secured switching distance sao | |
| in x direction/installation position D | min. 2 mm |
| in x direction/installation position C | min. 3 mm |
| in x direction/installation position A | min. 10 mm |
| in x direction/installation position B | min. 9 mm |
In combination with actuator CES-A-BDN-06-158210, CES-A-BTN-C07-156230
| Switching hysteresis | 1 ... 2 mm |
In combination with actuator CES-A-BDN-06-158210
| Switch-on distance | |
| Installation position C | 8 mm |
| Installation position D | 7 mm |
| Installation position A | 16 mm |
| Installation position B | 11 mm |
| Secured switch-off distance sar | |
| in x direction/installation position C | max. 21 mm |
| in x direction/installation position A | max. 24 mm |
| Secured switching distance sao | |
| in x direction/installation position A | min. 13 mm |
| in x direction/installation position C | min. 6 mm |
Aksesuar
CEM-C60
Connection material
Y-distributor M12 with connecting cable, for IO-Link evaluation
158192
AC-YD-V0,2-SBB-158192
AC-YD-V0,2-SBB-158192
- For series connection of BR safety switches in switch chains with IO-Link evaluation
- Y-distributor with M12 female plug, 8-pin
- Male plug straight, 5-pin
- Female plug straight, 5-pin
- TPU housing, black
- Cable length 0.2 m / PVC
158193
AC-YD-V1,0-SBB-158193
AC-YD-V1,0-SBB-158193
- For series connection of AR/BR safety switches in switch chains with ESM-CB for IO-Link evaluation
- Y-distributor with M12 female plug, 8-pin
- Male plug straight, 5-pin
- Female plug straight, 5-pin
- TPU housing, black
- Cable length 1.0 m
Y-distributor M12 with connecting cable, without IO-Link evaluation
111696
AC-YD-V0,2-SBB-111696
AC-YD-V0,2-SBB-111696
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 0.2 m
112395
AC-YD-V1,0-SBB-112395
AC-YD-V1,0-SBB-112395
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 1 m
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
EU-Konformitätserklärung
Dok. No.
EDC2510141
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001472
Versiyon
Dil
Boyut
0,1 MB
Instructions
Operating Instructions Non-Contact Safety Switch CES-I-BR-.-C07-… (Unicode/Multicode)
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Non-Contact Safety Switch CES-I-BR-.-C07-… (Unicode/Multicode)
Dok. No.
2510145
Versiyon
12/22
Dil
Boyut
2,8 MB
Mode d’emploi Interrupteur de sécurité sans contact CES-I-BR-.-C07-… (unicode / multicode)
Dok. No.
2510145
Versiyon
12/22
Dil
Boyut
2,8 MB
Manual de instrucciones Interruptor de seguridad sin contacto CES-I-BR-.-C07-… (Unicode/Multicode)
Dok. No.
2510145
Versiyon
12/22
Dil
Boyut
2,8 MB
Betriebsanleitung Berührungsloser Sicherheitsschalter CES-I-BR-.-C07-… (Uni-/Multicode)
Dok. No.
2510145
Versiyon
12/22
Dil
Boyut
2,8 MB
Istruzioni di impiego Finecorsa di sicurezza senza contatto CES-I-BR-.-C07-… (Unicode/Multicode)
Dok. No.
2510145
Versiyon
12/22
Dil
Boyut
2,8 MB
Diğer Belgeler
Approvals and certificates
ECOLAB
Dok. No.
Versiyon
Dil
Boyut
ECOLAB
Dok. No.
Versiyon
Dil
Boyut
0,2 MB
FCC
Dok. No.
Versiyon
Dil
Boyut
FCC
Dok. No.
Versiyon
Dil
Boyut
0,2 MB
ISED
Dok. No.
Versiyon
Dil
Boyut
ISED
Dok. No.
Versiyon
Dil
Boyut
0,1 MB
TUEV Süd München Z10 Zertifikat
Dok. No.
Versiyon
Dil
Boyut
TUEV Süd München Z10 Zertifikat
Dok. No.
Versiyon
Dil
Boyut
0,4 MB
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
Sales documents
Communication du futur – industrie 4.0
Dok. No.
Versiyon
Dil
Boyut
Communication du futur – industrie 4.0
Dok. No.
159044
Versiyon
08-03/23
Dil
Boyut
4,7 MB
Flexibly safe - Transponder-coded safety systems CES
Dok. No.
Versiyon
Dil
Boyut
Flexibly safe - Transponder-coded safety systems CES
Dok. No.
120233
Versiyon
06-06/22
Dil
Boyut
7,3 MB
Future-proof Communication – Industry 4.0
Dok. No.
Versiyon
Dil
Boyut
Future-proof Communication – Industry 4.0
Dok. No.
159043
Versiyon
08-03/23
Dil
Boyut
5,8 MB
La comunicación del futuro: la industria 4.0
Dok. No.
Versiyon
Dil
Boyut
La comunicación del futuro: la industria 4.0
Dok. No.
159045
Versiyon
08-03/23
Dil
Boyut
5,8 MB
Zukunftsfähige Kommunikation – Industrie 4.0
Dok. No.
Versiyon
Dil
Boyut
Zukunftsfähige Kommunikation – Industrie 4.0
Dok. No.
159042
Versiyon
08-03/23
Dil
Boyut
5,8 MB
面向未来的通信 – 工业4.0
Dok. No.
Versiyon
Dil
Boyut
面向未来的通信 – 工业4.0
Dok. No.
164814
Versiyon
06-05/21
Dil
Boyut
6,2 MB
Sipariş verileri
| Sip. No. | 156233 |
| Makale adı | CES-I-BR-M-C07-SA-156233 |
| Ağırlık | 0,055kg |
| Gümrük sınıfı | 85365019000 |
| ECLASS | 27-27-24-03 Safety-related transponder switch |
