AnasayfaProductsTransponder-coded safety switches without guard lockingCES-AP safety switchCES-I-AP-M-C14-U20-158631
Non-contact safety switches CES-I-AP-.-C14-…, with cable end sleeves
- Safety switch with integrated evaluation electronics
- Safety switch CES-C04 encapsulated in epoxy resin
- Tested for material resistance in accordance with Ecolab specifications
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 20 m, with cable end sleeves
- Multicode
- Monitoring output OD
Açıklama
Installation position
Permissible installation position
Attention:
The actuating range may vary depending on the substrate material and installation situation.
Typical actuating range
(Only in combination with actuator CES-A-BBN)
For a side approach direction for the actuator and safety switch, a minimum distance of s = 10 mm must be maintained so that the actuating range of the side lobes is not entered.
Multicode evaluation
Every suitable actuator is detected by the switch.
Category according to EN 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN 13849-1
Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Terminal assignment
| Designation | Function | Connecting cable conductor coloring |
|---|---|---|
| UB | Power supply, DC 24 V | BN |
| FO1A | Safety output, channel 1 | WH |
| 0 V | Ground, DC 0 V | BU |
| FO1B | Safety output, channel 2 | BK |
| OD | Monitoring output | GY |
Dimensional drawings
| 1 | Active face |
| 2 | LED status indication |
| 3 | Cable end sleeve on cable end |
Connection examples
Teknik Veriler
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 300 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 300 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| Current consumption | max. 35 mA (without taking into account the load currents on the monitoring output and the safety outputs) |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OD | |
| Output type | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | 0.8 x UB ... UB V DC |
| Switching current | max. 50 mA |
| Safety outputs FO1A / FO1B | |
| Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U (FO1A) / U (FO1B) | 0 ... 1 V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| HIGH U (FO1A) / U (FO1B) | UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 150 mA |
| Test pulse duration | max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm) |
| Test pulse interval | min. 100 ms |
Mechanical values and environment
| Connection type | Connecting cable PUR, length 20 m |
| Tightening torque | |
| Fixing screws | 2 Nm |
| Ready delay | 10 s |
| Dynamic bending radius | 10 x cable diameter |
| Static bending radius | 5 x cable diameter |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Mounting distance | |
| between switches | min. 80 mm |
| Mounting type | non-flush on metal |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | |
| with UB = 24 V DC | 0 ... +65 °C |
| Material | |
| Housing | 2-component epoxy resin |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | - | 4.1x10-9 | 4 | 20 y |
In combination with actuator CES-A-BBN-C14-160441
| Switch-on distance | |
| Installation position A / in z direction | 20 mm |
| Installation position D / in z direction | 15 mm |
| Secured switch-off distance sar | |
| Installation position A / in y direction | max. 72 mm |
| Installation position D / in x/z direction | max. 60 mm |
| Installation position D / in y direction | max. 68 mm |
| Installation position A / in x/z direction | max. 64 mm |
| Secured switching distance sao | |
| Installation position D / in z direction | min. 5 mm |
| Installation position A / in z direction | min. 10 mm |
Aksesuar
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
EU-Konformitätserklärung
Dok. No.
EDC2138020
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001471
Versiyon
Dil
Boyut
0,2 MB
Instructions
Operating Instructions Non-Contact Safety Switch
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Non-Contact Safety Switch
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Dok. No.
2115159
Versiyon
14-05/24
Dil
Boyut
1,8 MB
Mode d’emploi Interrupteur de sécurité sans contact
CES-I-AP-.-C04/C14-… (unicode / multicode)
Dok. No.
2115159
Versiyon
14-05/24
Dil
Boyut
1,8 MB
Manual de instrucciones Interruptor de seguridad sin contacto
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Dok. No.
2115159
Versiyon
14-05/24
Dil
Boyut
1,8 MB
Betriebsanleitung Berührungsloser Sicherheitsschalter CES-I-AP-.-C04/C14-… (Uni-/Multicode)
Dok. No.
2115159
Versiyon
14-05/24
Dil
Boyut
1,8 MB
Istruzioni di impiego Finecorsa di sicurezza senza contatto
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Dok. No.
2115159
Versiyon
14-05/24
Dil
Boyut
1,8 MB
Návod k použití Bezkontaktní bezpečnostní spínač
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Dok. No.
2115159
Versiyon
14-05/24
Dil
Boyut
2,2 MB
Diğer Belgeler
Approvals and certificates
Approval
Dok. No.
Versiyon
Dil
Boyut
Approval
Homologation
Homologación
EAC
Homologação
Omologazione
认证
認可
승인
Сертификат
Atest
Engedély
Разрешително
Godkendelse
Heakskiit
Hyväksyntä
Έγκριση
Odobrenje
Atļauja
Patvirtinimas
Goedkeuring
Godkjenning
Dopuszczenie
Godkännande
Dovoljenje
Povolenie
Onay
Дозвіл
Homologation
Homologación
EAC
Homologação
Omologazione
认证
認可
승인
Сертификат
Atest
Engedély
Разрешително
Godkendelse
Heakskiit
Hyväksyntä
Έγκριση
Odobrenje
Atļauja
Patvirtinimas
Goedkeuring
Godkjenning
Dopuszczenie
Godkännande
Dovoljenje
Povolenie
Onay
Дозвіл
Dok. No.
Versiyon
Dil
Boyut
0,6 MB
Approval
Autorisation
Aprobación
ECOLAB
Aprovação
审批
承認
승인
Schválení
Autorisation
Aprobación
ECOLAB
Aprovação
审批
承認
승인
Schválení
Dok. No.
Versiyon
Dil
Boyut
0,1 MB
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
Sales documents
Flexibly safe - Transponder-coded safety systems CES
Dok. No.
Versiyon
Dil
Boyut
Flexibly safe - Transponder-coded safety systems CES
Dok. No.
120233
Versiyon
06-06/22
Dil
Boyut
7,3 MB
UQS document
Bescheinigung
Dok. No.
Versiyon
Dil
Boyut
Bescheinigung
Dok. No.
ECO2116783
Versiyon
Dil
Boyut
0,2 MB
Sipariş verileri
| Sip. No. | 158631 |
| Makale adı | CES-I-AP-M-C14-U20-158631 |
| Ağırlık | 0,08kg |
| Gümrük sınıfı | 85365019000 |
| ECLASS | 27-27-24-03 Safety-related transponder switch |
