AnasayfaProductsSafety engineering for connection to IO-LinkBP/BR safety switch with guard lockingCTS-C1-BP-CC-FLX-AP-VSA-167917
Transponder-coded safety switch CTS-C1-BP with FlexFunction, M12
- Up to category 4 / PL e according to EN ISO 13849-1
- Closed-circuit current principle
- Connecting cable , PVC, 25 cm, plug connector M12, 8-pin
- Monitoring outputs guard locking and door position 1
Açıklama
Guard locking type
CTS-C1 | Guard locking actuated by spring force and power-ON released (closed-circuit current principle). |
FlexFunction
The actuator configures the switch on setup. Depending on the actuator selected, guard lock monitoring of the safety switch is active or inactive and evaluation of the actuator code takes place with a high or low coding level.
Auxiliary release / escape release
- Auxiliary release on front and rear side
- Escape release can be retrofitted, on rear side
Connector assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IMP | Operating voltage of solenoid 24 V DC | WH |
| 2 | UB | Electronics operating voltage 24 V DC | BN | |
| 3 | FO1A | Safety output, channel A | GN | |
| 4 | FO1B | Safety output, channel B | YE | |
| 5 | OX1/C | Monitoring output 1 / communication | GY | |
| 6 | OX2 | Door monitoring output 2 | PK | |
| 7 | 0VUB | Electronics operating voltage 0 V DC | BU | |
| 8 | IMM | Operating voltage of solenoid 0 V DC | RD |
Assignment of pins 5 and 6 depends on the function actuator
| Pin | A-FLX-D-0C-167919 | A-FLX-D-0D-169044 | A-FLX-D-0E-169045 | A-FLX-D-0F-169046 |
|---|---|---|---|---|
| L + HC | I + HC | L + LC | I + LC | |
| 3 |  | | ||
| 4 | | | ||
| 5 | OL/C Guard locking / communication | OL/C Guard locking / communication | OL/C Guard locking / communication | OL/C Guard locking / communication |
| 6 | OD | OD | OD | OD |
Dimensional drawings
| 1 | Auxiliary release |
| 2 | LEDs |
Connection examples
Teknik Veriler
Approvals
Electrical connection values
| Fuse | |
| IMP | 1 ... 8 A external |
| UB | 1 ... 8 A external |
| Power consumption | 9 W |
| rated conditional short-circuit current | 100 A |
| Rated insulation voltage Ui | 32 V |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +20% (reverse polarity protected, regulated, residual ripple<5%, SELV) |
| Discrepancy time | max. 10 ms |
| Turn-on time | max. 400 ms |
| EMC protection requirements | Acc. to EN 60947-5-3 |
| Solenoid operating voltage DC | 24 V DC -15% ... +20% reverse polarity protected, regulated, residual ripple<5%, SELV |
| Solenoid duty cycle | 100 % |
| Risk time according to EN 60947-5-3 | max. 200 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 10 ms |
| Switching load | |
| according to UL | DC 24 V, class 2 |
| Safety class | III |
| Current consumption | |
| IIMP | 500 mA |
| IUB | 50 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring outputs Ox/C | |
| Output type | p-switching, short circuit-proof |
| Output voltage | 0.8xUB ... UB V DC |
| Output current | |
| I-configuration (guard lock monitoring inactive) | 1 ... 10 mA |
| L configuration (guard lock monitoring active) | 1 ... 20 mA |
| Safety outputs FO1A/FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| UFO1A /UFO1B HIGH | UB-4V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths) |
| UFO1A /UFO1B LOW | 0 ... 1 V DC |
| Output current | |
| L configuration (guard lock monitoring active) | 1 ... 80 mA |
| I-configuration (guard lock monitoring inactive) | 1 ... 75 mA |
| Utilization category | |
| DC-13 I configuration (guard lock monitoring inactive) | 24 V 75 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| DC-13 L configuration (guard lock monitoring active) | 24 V 80 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| Test pulse duration | max. 0.3 ms |
| Test pulse interval | min. 96 ms |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Extraction force | 25 N |
| Ready delay | max. 1 s |
| Actuating force | 25 N |
| Installation orientation | any |
| Mechanical life | 1 x 10⁶ |
| Retention force | 10 N |
| Shock and vibration resistance | Acc. to EN 60947-5-3 |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | -20 ... +55 °C (A maximum value of +50 °C applies in the I-configuration of the switch (guard lock monitoring inactive)) |
| Material | |
| Safety switch housing | Reinforced thermoplastic |
| Switch head cover | Die-cast zinc |
| Connecting cable | PVC |
| Locking force Fmax | 3900 N |
| Locking force FZh | 3000 N |
| Guard locking principle | Closed-circuit current principle |
| Connection X1 | |
| Connection type | Connecting cable with plug connector M12 |
| Static bending radius | 8x cable diameter |
| Cable outlet | straight |
| Cable length | 0.25 m |
| Number of pins | 8 |
| Safety outputs FO1A/FO1B | |
| Switching frequency | max. 0.2 Hz |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | 3 | 6.44x10-9 | 4 | 20 y |
| Monitoring of guard locking | PL e | 3 | 6.44x10-9 | 4 | 20 y |
| Valid only with active guard lock monitoring (guard locking for personnel protection). Dependent on the actuator used. | |||||
| PL | Maximum SIL | Category | Mission time | |
|---|---|---|---|---|
| Control of guard locking | Depending on external control of guard locking | 20 y | ||
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Aksesuar
Actuator
Function actuator for safety switch CTS
167919
A-FLX-D-0C-167919
A-FLX-D-0C-167919
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the guard locking, high coding level (L+HC)
169045
A-FLX-D-0E-169045
A-FLX-D-0E-169045
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the guard locking, low coding level (L+LC)
169044
A-FLX-D-0D-169044
A-FLX-D-0D-169044
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the door position, high coding level (I+HC)
169046
A-FLX-D-0F-169046
A-FLX-D-0F-169046
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the door position, low coding level (I+LC)
Connection material
Function expansion
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
EU-Konformitätserklärung
Dok. No.
EDC20001628
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001651
Versiyon
Dil
Boyut
0,2 MB
Instructions
Operating Instructions Transponder-Coded Safety Switch with Guard Locking CTS-C1-BP/BR-FLX High/Low Coding Level
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Transponder-Coded Safety Switch with Guard Locking CTS-C1-BP/BR-FLX High/Low Coding Level
Dok. No.
MAN20001587
Versiyon
12/23
Dil
Boyut
7,1 MB
Mode d’emploi Interrupteur de sécurité à codage par transpondeur avec interverrouillage CTS-C1-BP/BR-FLX Haut / Bas niveau de codage
Dok. No.
MAN20001587
Versiyon
12/23
Dil
Boyut
7,2 MB
Manual de instrucciones Interruptor de seguridad codificado por transponder con bloqueo CTS-C1-BP/BR-FLX con alto/bajo nivel de codificación
Dok. No.
MAN20001587
Versiyon
12/23
Dil
Boyut
7,2 MB
Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung CTS-C1-BP/BR-FLX Hoch-/Niedrigcodiert
Dok. No.
MAN20001587
Versiyon
12/23
Dil
Boyut
7,2 MB
操作説明書 トランスポンダー コーデッド安全スイッチ ガードロック付きCTS-C1-BP/BR-FLX 高 / 低コーディングレベル
Dok. No.
MAN20001587
Versiyon
12/23
Dil
Boyut
7,5 MB
Diğer Belgeler
Approvals and certificates
FCC
Dok. No.
Versiyon
Dil
Boyut
FCC
Dok. No.
20001625
Versiyon
Dil
Boyut
0,2 MB
ISED_CTS
Dok. No.
Versiyon
Dil
Boyut
ISED_CTS
Dok. No.
20001626
Versiyon
Dil
Boyut
0,1 MB
UL
Dok. No.
Versiyon
Dil
Boyut
UL
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
Sales documents
1 つですべてに対応
FlexFunction 付き安全スイッチ CTS
Dok. No.
Versiyon
Dil
Boyut
1 つですべてに対応
FlexFunction 付き安全スイッチ CTS
Dok. No.
171724
Versiyon
02-05/22
Dil
Boyut
6,6 MB
Communication du futur – industrie 4.0
Dok. No.
Versiyon
Dil
Boyut
Communication du futur – industrie 4.0
Dok. No.
159044
Versiyon
08-03/23
Dil
Boyut
4,7 MB
Future-proof Communication – Industry 4.0
Dok. No.
Versiyon
Dil
Boyut
Future-proof Communication – Industry 4.0
Dok. No.
159043
Versiyon
08-03/23
Dil
Boyut
5,8 MB
La comunicación del futuro: la industria 4.0
Dok. No.
Versiyon
Dil
Boyut
La comunicación del futuro: la industria 4.0
Dok. No.
159045
Versiyon
08-03/23
Dil
Boyut
5,8 MB
One fits all
Safety switch CTS with FlexFunction
Dok. No.
Versiyon
Dil
Boyut
One fits all
Safety switch CTS with FlexFunction
Dok. No.
169642
Versiyon
02-05/22
Dil
Boyut
2,8 MB
UQS document
Bescheinigung
Dok. No.
Versiyon
Dil
Boyut
Bescheinigung
Dok. No.
ECO20001630
Versiyon
Dil
Boyut
0,2 MB
CAD Verileri
Sipariş verileri
| Sip. No. | 167917 |
| Makale adı | CTS-C1-BP-CC-FLX-AP-VSA-167917 |
| Ağırlık | 0,6kg |
| Gümrük sınıfı | 85365019000 |
| ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |
