ZSM, pushbuttons, LED, stop command device, plug connector, 12-pin
- 3-stage function
- Stop command device
- LED indicator
- Pushbuttons
- Straight connecting cable, 0.25 m
- Plug connector
Açıklama
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Stop command device
Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.
Upper position for rapid access in an emergency
LED indicator
The LED indicator is used for visual feedback directly at the enabling switch.
Pushbuttons
Additional functions can be run directly at the enabling switch using the pushbuttons.
Cable
The high-quality connecting cables are available in a straight version.
Dimensional drawings
Connection examples
Connection examples
Connection examples
Teknik Veriler
Approvals
Operating and display elements
Item | Color | Extras | Note slide-in label | Slide-in label | Switching element | Version | Number | Designation1 | LED |
---|---|---|---|---|---|---|---|---|---|
Emergency stop device | 1 | ||||||||
Green | LED | 1 | |||||||
black | Pushbutton | 1 |
Electrical connection values
Connecting cable | 12x0.14 mm² (screened) |
rated conditional short-circuit current | 100 A |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 0.5 kV |
Utilization category | |
DC-13 | 24 V 0.01 A (For additional indicators) |
DC-13 | 24 V 0.3 A (For additional controls) |
DC-13 | 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
Short circuit protection according to IEC 60269-1 | 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.) |
Switching characteristics | 3-stage enabling switch |
Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
Connection type | Plug connector number of pins 12 |
Number of changeover contacts | 3 (Connection as per block diagram) |
Cable length | |
straight | 0.25 m |
Mechanical life | 1 x 10⁶ |
Switching principle | Snap-action contact element |
Degree of protection | IP54 |
Ambient temperature | -5 ... +60 °C |
Material | PA, CR, TPE (Low PAH) |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
Emergency stop | |
B10D | 0.1 x 10⁶ |
Enabling switch | |
B10D | 0.1 x 10⁶ |
Miscellaneous
in compliance with | 60947-5-8 |
Aksesuar
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Diğer Belgeler
Sipariş verileri
Sip. No. | 169080 |
Makale adı | ZSM2104-169080 |
Ağırlık | 0,6kg |
Gümrük sınıfı | 85371098 |
ECLASS | 27-37-12-38 Agreement switch |