AnasayfaProductsSafety engineering for connection to IO-LinkBP/BR safety switch without guard locking
BP/BR safety switch without guard locking
Benefits for you
- Communicating safety switch
- Industry 4.0 ready
- Safety category 4 and PL e according to EN ISO 13849-1.
Industry 4.0 ready
Switches from system families BP and BR can communicate in combination with an EUCHNER IO-Link Gateway, and send process and device data to higher-level control systems. Comprehensive diagnostic messages enable rapid and targeted troubleshooting.![BP/BR safety switch without guard locking](https://assets2.euchner.de/files/93/33/729333.jpg)
Diagnostic information
The safety switches in this group can forward comprehensive diagnostic information to the control system. The devices supply process-relevant parameters in real time. They even provide information on preventive maintenance.The sensors measure relevant parameters in the surroundings to indicate problems before a machine failure can occur. In combination with the IO-Link Gateways GWY-CB and ESM-CB, this information is polled from every switch and provided to the control system via IO-Link.
Ürünler (7)
Sonuç bulunamadı
![CES-I-BP-M-C07-SB-160076](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
160076
CES-I-BP-M-C07-SB-160076
Non-contact safety switches CES-I-BP-.-C07, M12
CES-I-BP-M-C07-SB-160076
Non-contact safety switches CES-I-BP-.-C07, M12
- Safety switch with integrated evaluation electronics
- Suitable for separate operation (no series connection)
- Multicode
- M12 plug connector, 5-pin
- With door monitoring output OD
- Diagnostics via IO-Link with safety module ESM-CB
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
![CES-I-BP-M-C07-SI-162813](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
162813
CES-I-BP-M-C07-SI-162813
Non-contact safety switches CES-I-BP-.-C07, M12
CES-I-BP-M-C07-SI-162813
Non-contact safety switches CES-I-BP-.-C07, M12
- Safety switch with integrated evaluation electronics
- Suitable for separate operation (no series connection)
- Multicode
- M12 plug connector, 5-pin (pin 5 not used)
- Direct connection to IP67 field modules
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
![CES-I-BP-U-C07-SB-160080](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
160080
CES-I-BP-U-C07-SB-160080
Non-contact safety switches CES-I-BP-.-C07, M12
CES-I-BP-U-C07-SB-160080
Non-contact safety switches CES-I-BP-.-C07, M12
- Safety switch with integrated evaluation electronics
- Suitable for separate operation (no series connection)
- Unicode
- M12 plug connector, 5-pin
- With door monitoring output OD
- Diagnostics via IO-Link with safety module ESM-CB
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
![CES-I-BP-U-C07-SI-162815](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
162815
CES-I-BP-U-C07-SI-162815
Non-contact safety switches CES-I-BP-.-C07, M12
CES-I-BP-U-C07-SI-162815
Non-contact safety switches CES-I-BP-.-C07, M12
- Safety switch with integrated evaluation electronics
- Suitable for separate operation (no series connection)
- Unicode
- M12 plug connector, 5-pin (pin 5 not used)
- Direct connection to IP67 field modules
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
![CES-I-BR-CC-FLX-C07-SA-165914](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
165914
CES-I-BR-CC-FLX-C07-SA-165914
Non-contact safety switches CES-I-BR-CC-FLX-C07, with FlexFunction, suitable for actuators with same coding
CES-I-BR-CC-FLX-C07-SA-165914
Non-contact safety switches CES-I-BR-CC-FLX-C07, with FlexFunction, suitable for actuators with same coding
- Safety switch with integrated evaluation electronics
- Suitable for actuator with same coding
- Several devices can be connected in series, max. 20
- Switch chains up to 200 m long
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Diagnostic information via BR IO-Link Gateway
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Plug connector M12, 8-pin (aligned)
- The safety switch can be used only in conjunction with actuators designated for this purpose.
![CES-I-BR-M-C07-SA-156233](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
156233
CES-I-BR-M-C07-SA-156233
Non-contact safety switches CES-I-BR-.-C07, M12
CES-I-BR-M-C07-SA-156233
Non-contact safety switches CES-I-BR-.-C07, M12
- Safety switch with integrated evaluation electronics
- Several devices can be connected in series, max. 20
- Multicode
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Monitoring output OD
- Diagnostic information via BR/IO-Link Gateway GWY-CB or ESM-CB
- Three active faces
- Plug connector M12, 8-pin (aligned)
- Switch chains up to 200 m long
![CES-I-BR-U-C07-SA-157920](https://assets2.euchner.de/files/70/21/ast_737021_xs.png)
157920
CES-I-BR-U-C07-SA-157920
Non-contact safety switches CES-I-BR-.-C07, M12
CES-I-BR-U-C07-SA-157920
Non-contact safety switches CES-I-BR-.-C07, M12
- Safety switch with integrated evaluation electronics
- Several devices can be connected in series, max. 20
- Unicode
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Monitoring output OD
- Diagnostic information via BR/IO-Link Gateway GWY-CB or ESM-CB
- Three active faces
- Plug connector M12, 8-pin (aligned)
- Switch chains up to 200 m long