AnasayfaProductsSafety engineering for connection to IO-LinkBP/BR safety switch with guard locking

BP/BR safety switch with guard locking

Benefits for you

Communicating safety switch with guard locking and safe guard lock monitoring
Industry 4.0 ready
Safety category 4 and PL e according to EN ISO 13849-1

Industry 4.0 ready

Switches from system families BP and BR can communicate in combination with an EUCHNER IO-Link Gateway, and send process and device data to higher-level control systems. Comprehensive diagnostic messages enable rapid and targeted troubleshooting.

Diagnostic information

The safety switches in this group can forward comprehensive diagnostic information to the control system. The devices supply process-relevant parameters in real time. They even provide information on preventive maintenance. The sensors measure relevant parameters in the surroundings to indicate problems before a machine failure can occur. In combination with the IO-Link Gateways GWY-CB and ESM-CB, this information is polled from every switch and provided to the control system via IO-Link.

Ürünler (41)

Sonuç bulunamadı

166702
CTA-L1-BP-U-HA-AP-SA-166702
Transponder-coded safety switch CTA-BP, M12

Safety switch with guard locking and integrated evaluation electronics
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Closed-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With plug connector M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

165454
CTA-L1-BP-U-HA-AP-SII-165454
Transponder-coded safety switch CTA-BP, 2 x M12

Safety switch with guard locking and integrated evaluation electronics
Direct connection to decentralized peripheral systems (e.g. ET200pro)
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Closed-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With 2 plug connectors M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

170930
CTA-L1-BP-U-HA-AP-SII-170930
Transponder-coded safety switch CTA-BP, 2 x M12

Safety switch with guard locking and integrated evaluation electronics
Direct connection to decentralized peripheral systems (e.g. ET200pro)
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Closed-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With 2 plug connectors M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

166653
CTA-L1-BR-U-HA-AP-SAB-166653
Transponder-coded safety switch CTA-BR, 2 x M12

Safety switch with guard locking and integrated evaluation electronics
Up to 20 switches in series
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Closed-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With plug connector 2 x M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

166257
CTA-L1-BR-U-HA-AP-SH-166257
Transponder-coded safety switch CTA-BR, M23

Safety switch with guard locking and integrated evaluation electronics
Series connection possible
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Closed-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With plug connector M23
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

170659
CTA-L2-BP-U-HA-AP-SA-170659
Transponder-coded safety switch CTA-BP, M12

Safety switch with guard locking and integrated evaluation electronics
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Open-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With plug connector M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

166701
CTA-L2-BR-U-HA-AP-SAB-166701
Transponder-coded safety switch CTA-BR, 2 x M12

Safety switch with guard locking and integrated evaluation electronics
Up to 20 switches in series
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Open-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With 2 plug connectors M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

170491
CTM-C2-BP-HC-FLX-AZ-SA-170491
Transponder-coded safety switch CTM-C2-BP, M12

Guard locking suitable for process protection only
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 20/18/5 N
Plug connector M12, 8-pin
Auxiliary release
High coding level
FlexFunction device

170490
CTM-CBI-BP-HC-FLX-AZ-SA-170490
Transponder-coded safety switch CTM-CBI-BP, M12

Bistable guard locking
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 20/18/5 N
Plug connector M12, 8-pin
Auxiliary release
High coding level
FlexFunction device

168250
CTM-I2-BR-U-AZ-SA-168250
Transponder-coded safety switch CTM-I2-BR, M12

Guard locking only suitable for process protection: The safety outputs are switched on when the door is closed.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force 20/18/5 N
Plug connector M12, 8-pin
Auxiliary release
Unicode

168251
CTM-I2-BR-U-AZ-SA-168251
Transponder-coded safety switch CTM-I2-BR, M12

Guard locking only suitable for process protection: The safety outputs are switched on when the door is closed.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 20/18/5 N
Plug connector M12, 8-pin
Auxiliary release
Unicode

166870
CTM-L2-BR-M-AZ-SA-166870
Transponder-coded safety switch CTM-L2-BR, M12

Guard locking only suitable for process protection: The safety outputs are switched on when guard locking is active.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 35/30/15 N
Plug connector M12, 8-pin
Auxiliary release
Multicode

167789
CTM-L2-BR-M-ZZ-SA-P-167789
Transponder-coded safety switch CTM-L2-BR, M12

Guard locking only suitable for process protection: The safety outputs are switched on when guard locking is active.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 35/30/15 N
Plug connector M12, 8-pin
Multicode
Hygienic version

173223
CTM-L2-BR-M-ZZ-V15-P-173223
Transponder-coded safety switch CTM-L2-BR, connection cable, flying lead

Guard locking only suitable for process protection: The safety outputs are switched on when guard locking is active.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 35/30/15 N
Connection cable, connecting cable, 15m, flying lead
Multicode
Hygienic version

168866
CTM-L2-BR-U-AZ-SA-168866
Transponder-coded safety switch CTM-L2-BR, M12

Guard locking only suitable for process protection: The safety outputs are switched on when guard locking is active.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 35/30/15 N
Plug connector M12, 8-pin
Auxiliary release
Unicode

166088
CTM-LBI-BP-M-AZ-SA-166088
Transponder-coded safety switch CTM-LBI-BP, M12