Safety switch NZ.VZ.VSE, cable entry M20 x 1.5
- Cable entry M20 x 1.5
- 1 positively driven, positively driven contact
- 1 NO contacts
- Guard locking for process protection
- Open-circuit current principle

Açıklama
Guard locking principle
Operating current (power to lock): In the case of a safety guard with guard locking according to the open-circuit current principle, the safety guard is locked until the power supply to the guard locking solenoid is break-before-make. The guard is unlocked by spring force. This is also referred to as electrical guard locking.
Switching element
528H | Slow-action switching contact 1 positively driven, positively driven contact |
Guard locking for process protection
The safety switch meets the requirements for interlocking devices with guard locking for process protection. It has no safety monitoring of the guard locking.
Required accessories
Actuator and solenoid plug are not included in the scope of delivery.
Functional drawings

Dimensional drawings

1) | When inserted and secured |
a | Travel without operation: actuator is in the guide slot, but function is not triggered. |
b | Switching operation completed: actuator must be inserted to this point to ensure safe switching. The actuator must be withdrawn at least to point a for switching off. |
Connection examples

Teknik Veriler
Approvals


Electrical connection values
Connection cross section | 0.34 ... 1.5 mm² |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2.5 kV |
Utilization category | |
DC-13 | 4 A 24 V |
AC-15 | 4 A 230 V |
Short circuit protection according to IEC 60269-1 | 4A gG |
Solenoid operating voltage | |
AC | 230 V -15% ... 10% |
Switching voltage | |
min. at 10 mA | 12 V |
Switching current | |
min. at 24 V | 1 mA |
thermal rated current Ith | 4 A |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | A |
Connection type | |
1 x | M20 x 1.5 |
Number of door position NO contacts | 1 |
Number of door position positively driven contacts | 1 |
Extraction force | 40 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 45 N |
Installation orientation | any |
Insertion depth | 52 mm |
Solenoid alignment | 3 |
Mechanical life | 2 x 10⁶ |
Retention force | 35 N |
Switching principle | Slow-action switching contact |
Degree of protection | IP65 |
Ambient temperature | -25 ... +80 °C |
Material | |
Housing | Anodized die-cast alloy |
Contact | Silver alloy, gold flashed |
Locking force Fmax | 2000 N |
Locking force FZh | 1500 N |
Guard locking principle | Open-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of the guard position | 4.5x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
In combination with actuator ACTUATOR-Z-G
Overtravel | 4 mm |
In combination with actuator ACTUATOR-Z-GN
Overtravel | 16 mm |
Aksesuar

BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator

BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces

BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator

BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator

RIEGEL NZ-C
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the left
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ-AR2
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the right
- Detent knob in open position
- Detent knob mechanism in closed position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ-CR2
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the left
- Detent knob in open position
- Detent knob mechanism in closed position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ-AB
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the right
- Ball detent mechanism in closed position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ-CB
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the left
- Ball detent mechanism in closed position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ/TZ-S1
- Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
- Aluminum bolt
- For doors hinged on the right or left.
- Spring catch in open position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ/TZ-S2
- Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
- Aluminum bolt
- For doors hinged on the right or left.
- Spring catch in open position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ/TZ-S1/CF
- Aluminum bolt
- For doors hinged on the left
- Bolt with escape lever
- Spring catch in open position
- Suitable for a door gap of approx. 5 mm

RIEGEL NZ/TZ-S1/AF
- Aluminum bolt
- For doors hinged on the right
- Bolt with escape lever
- Spring catch in open position
- Suitable for a door gap of approx. 5 mm
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler

Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità

Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità


Mode d’emploi Interrupteur de sécurité NZ.VZ-…VS
Manual de instrucciones Interruptor de seguridad NZ.VZ-…VS
Betriebsanleitung Sicherheitsschalter NZ.VZ-…VS



Diğer Belgeler







CAD Verileri
Sipariş verileri
Sip. No. | 088047 |
Makale adı | NZ1VZ-528E3VSE09-M |
Ağırlık | 0,788kg |
Gümrük sınıfı | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |