AnasayfaProductsElectromechanical safety switches with guard lockingNZ.VZ.VS metal switch without guard lock monitoringNZ1VZ-538E3VSE07L110-M
Safety switch NZ.VZ.VSE (guard locking, open-circuit current principle)
- Housing according to EN 50041
- Cable entry M20 x 1.5
- LED indicator
Açıklama
LED function display
A function display is available for the following voltage range:
- AC 110 V±15% red
Guard locking type
VSE | Open-circuit current principle, guard locking by applying voltage to the solenoid. Release by spring force. |
Switching element
538H | Slow-action switching contact 2 NC |
Functional drawings
Dimensional drawings
a | Travel without operation: actuator is in the guide slot, but function is not triggered. |
b | Switching operation completed: actuator must be inserted to this point to ensure safe switching. The actuator must be withdrawn at least to point a for switching off. |
Connection examples
Teknik Veriler
Approvals
Electrical connection values
Connection cross section | 0.34 ... 0.75 mm² |
Display module | |
AC | 110 V Red |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2.5 kV |
Utilization category | |
DC-13 | 4 A 24 V |
AC-15 | 4 A 230 V |
Short circuit protection according to IEC 60269-1 | 4A gG |
Solenoid operating voltage | |
AC | 110 V -15% ... 10% |
Switching voltage | |
min. at 10 mA | 12 V |
Switching current | |
min. at 24 V | 1 mA |
thermal rated current Ith | 4 A |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | A |
Connection type | |
1 x | M20 x 1.5 |
Number of door position positively driven contacts | 2 |
Extraction force | 40 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 45 N |
Installation orientation | any |
Insertion depth | 52 mm |
Solenoid alignment | 3 |
Mechanical life | 2 x 10⁶ |
Retention force | 35 N |
Switching principle | Slow-action switching contact |
Degree of protection | IP65 |
Ambient temperature | -25 ... +80 °C |
Material | |
Contact | Silver alloy, gold flashed |
Housing | Anodized die-cast alloy |
Locking force Fmax | 2000 N |
Locking force FZh | 1500 N |
Guard locking principle | Open-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of guard locking | 4.5x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
PL | Maximum SIL | Category | Mission time | |
---|---|---|---|---|
Control of guard locking | Depending on external control of guard locking | 20 y |
In combination with actuator ACTUATOR-Z-GN
Overtravel | 16 mm |
In combination with actuator ACTUATOR-Z-G
Overtravel | 4 mm |
Aksesuar
Actuator
Actuator for safety switches NZ.VZ, NZ.VZ.VS and TZ
016849
BETAETIGER-Z-G
BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator
074411
BETAETIGER-Z-G/V25
BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces
072251
BETAETIGER-Z-GN
BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator
097436
BETAETIGER-Z-GME
BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator
Metal bolt
Bolt for safety switch NZ.VZ and NZ.VZ.VS
057735
RIEGEL NZ-C
RIEGEL NZ-C
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the left
- Suitable for a door gap of approx. 15 mm
078455
RIEGEL NZ-AR2
RIEGEL NZ-AR2
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the right
- Detent knob in open position
- Detent knob mechanism in closed position
- Suitable for a door gap of approx. 15 mm
078456
RIEGEL NZ-CR2
RIEGEL NZ-CR2
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the left
- Detent knob in open position
- Detent knob mechanism in closed position
- Suitable for a door gap of approx. 15 mm
083890
RIEGEL NZ-AB
RIEGEL NZ-AB
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the right
- Ball detent mechanism in closed position
- Suitable for a door gap of approx. 15 mm
083892
RIEGEL NZ-CB
RIEGEL NZ-CB
- Bolt for safety switch NZ.VZ and NZ.VZ.VS
- Steel bolt
- For doors hinged on the left
- Ball detent mechanism in closed position
- Suitable for a door gap of approx. 15 mm
Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
028357
RIEGEL NZ/TZ-S1
RIEGEL NZ/TZ-S1
- Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
- Aluminum bolt
- For doors hinged on the right or left.
- Spring catch in open position
- Suitable for a door gap of approx. 15 mm
028359
RIEGEL NZ/TZ-S2
RIEGEL NZ/TZ-S2
- Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
- Aluminum bolt
- For doors hinged on the right or left.
- Spring catch in open position
- Suitable for a door gap of approx. 15 mm
Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ with escape release
079785
RIEGEL NZ/TZ-S1/CF
RIEGEL NZ/TZ-S1/CF
- Aluminum bolt
- For doors hinged on the left
- Bolt with escape lever
- Spring catch in open position
- Suitable for a door gap of approx. 5 mm
079786
RIEGEL NZ/TZ-S1/AF
RIEGEL NZ/TZ-S1/AF
- Aluminum bolt
- For doors hinged on the right
- Bolt with escape lever
- Spring catch in open position
- Suitable for a door gap of approx. 5 mm
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU declaration of conformity
Dok. No.
Versiyon
Dil
Boyut
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. No.
EDC2539628
Versiyon
Dil
Boyut
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. No.
EDC2539628
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001551
Versiyon
Dil
Boyut
0,1 MB
Instructions
Operating Instructions Safety Switch NZ.VZ-…VS
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Safety Switch NZ.VZ-…VS
Mode d’emploi Interrupteur de sécurité NZ.VZ-…VS
Manual de instrucciones Interruptor de seguridad NZ.VZ-…VS
Betriebsanleitung Sicherheitsschalter NZ.VZ-…VS
Mode d’emploi Interrupteur de sécurité NZ.VZ-…VS
Manual de instrucciones Interruptor de seguridad NZ.VZ-…VS
Betriebsanleitung Sicherheitsschalter NZ.VZ-…VS
Dok. No.
2094066
Versiyon
04/24
Dil
Boyut
3,0 MB
Betriebsanleitung Sicherheitsschalter NZ.VZ-…VS
Dok. No.
2094066
Versiyon
04/24
Dil
Boyut
0,8 MB
Istruzioni di impiego Finecorsa di sicurezza NZ.VZ-…VS
Dok. No.
2094066
Versiyon
04/24
Dil
Boyut
0,8 MB
Návod na prevádzku Bezpečnostný spínač NZ.VZ-…VS
Dok. No.
2094066
Versiyon
04/24
Dil
Boyut
1,3 MB
Diğer Belgeler
Approvals and certificates
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
CAD Verileri
Sipariş verileri
Sip. No. | 090348 |
Makale adı | NZ1VZ-538E3VSE07L110-M |
Ağırlık | 0,809kg |
Gümrük sınıfı | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |