AnasayfaProductsEnabling switchZSB with plus/minus pushbuttonsZSB077027

ZSB077027 (Sip. No. 077027)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

ZSB, housing G3, 3-stage, illuminated +/- buttons, key-operated rotary switch and cable

3-stage function
Housing G3
Straight connecting cable, 3 m
Two illuminated pushbuttons
Key-operated rotary switch
Including holder

Açıklama

Switching element

210	2 NO + 1 NC

Cable

The high-quality connecting cables (individual screening of the safety contacts) are available in a straight version.

Key-operated rotary switch

For individual use, e.g. as an operating mode selector.

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Illuminated + and - buttons

These pushbuttons can be configured individually. For example, for moving axes in positive or negative direction.

Wiring diagram 210 with key-operated rotary switch

Dimensional drawings

Connection examples

Shift travel diagrams

	closed, enabling
	closed
	open

Teknik Veriler

Approvals

CCC2020980305002418_CQC2009010305380679_2024

Operating and display elements

Item	Color	Extras	Version	Switching element	Slide-in label	Note slide-in label	Number	Designation1	LED
			Illuminated + button
			Key-operated rotary switch
			Illuminated - button

Electrical connection values

Connecting cable	8x0.5 mm² + 8x0.14 mm² (4x0.5 mm² screened + 4x0.5 mm² unscreened + 8x0.14 mm² unscreened. Outer screen over everything.)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	0.8 kV
Utilization category
DC-13	2 A 24 V
AC-15	2 A 24 V
Short circuit protection according to IEC 60269-1
at 24V	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching voltage
min. at 10 mA	min. 12 V
Switching current
min. at 24 V	min. 1 mA
Degree of contamination (external, according to EN 60947-1)	3
	Display/control element
Utilization category
DC-13 Additional elements	100 mA 24 V
AC-15 Additional elements	400 mA 24 V
Short circuit protection according to IEC 60269-1
Additional elements at 24V	0.1A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)

Mechanical values and environment

Connection type	flying lead
Number of NO contacts	2
Number of positively driven contacts	1
Cable length
straight	3 m
Mechanical life
Position 1-2-3-1	0.1 x 10⁶
Position 1-2-1	0.1 x 10⁶
Switching principle	Slow-action contact element
Degree of protection	IP65
Ambient temperature	-5 ... +50 °C
Material
Housing	Plastic, yellow
Cap	Elastomer, low PAH, black

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Enabling switch
B_10D	0.5 x 10⁶

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
Kullanım talimatlarını tamamlayan tüm veri sayfaları
Uygunluk beyanı

Paketin tamamını indirin (ZIP, 2,4 MB)