ZSM, LED, + and - buttons, vibration motor, stop command device, reset button, plug connector HAN Q17
- 3-stage function
- Stop command device
- Vibration signal optional
- LED indicator
- Reset button ©
- + and – buttons
- Coiled connecting cable, 3.8 m
- Plug connector
Açıklama
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Stop command device
Machine stop (gray/yellow, with pull-to-reset and turn-to-reset) on the switch housing, for different wiring concepts.
Lower position, protected by anti-kink strain relief in case of a fall.
Vibration signal
The vibration signal is used for tactile feedback of the enabling position.
LED indicator
The LED indicator is used for visual feedback directly at the enabling switch.
Reset button ©
Button for reset function directly from the enabling switch.
+ and – buttons
These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.
Cable
The high-quality connecting cables are available in a coiled version.
Dimensional drawings
Dimensional drawings
Connection examples
Connection examples
Connection examples
Teknik Veriler
Approvals
Operating and display elements
| Item | Color | Extras | Slide-in label | Switching element | Note slide-in label | Version | Number | Designation1 | LED |
|---|---|---|---|---|---|---|---|---|---|
| Blue | Labeled pushbutton | 1 | |||||||
| + button | 1 | ||||||||
| - button | 1 | ||||||||
| LED red/green | 1 | ||||||||
| gray | Machine stop | 1 | |||||||
| Vibration motor | 1 |
Electrical connection values
| Connecting cable | 18x0.25 mm² |
| rated conditional short-circuit current | 100 A |
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 0.5 kV |
| Utilization category | |
| DC-13 | 24 V 0.3 A (For additional controls) |
| DC-13 | 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| DC-13 | 24 V 0.01 A (For additional indicators) |
| Short circuit protection according to IEC 60269-1 | 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.) |
| Switching characteristics | 3-stage enabling switch |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Connection type | Plug connector number of pins 17 + PE |
| Number of changeover contacts | 3 (Connection as per block diagram) |
| Cable length | |
| coiled, short straight piece of cable on the enabling switch | 3.8 m |
| Mechanical life | 1 x 10⁶ |
| Switching principle | Snap-action contact element |
| Degree of protection | IP54 |
| Ambient temperature | -5 ... +60 °C |
| Material | PA, CR, TPE (Low PAH) |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Enabling switch | |
| B10D | 0.1 x 10⁶ |
| Machine stop gray | |
| B10D | 0.1 x 10⁶ |
Miscellaneous
| in compliance with | 60947-5-8 |
Aksesuar
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
EU-Konformitätserklärung
Dok. No.
EDC2109392
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001579
Versiyon
Dil
Boyut
0,1 MB
Instructions
Operating Instructions Enabling Switch ZSM
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Enabling Switch ZSM
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Dok. No.
2098540
Versiyon
07-12/23
Dil
Boyut
1,2 MB
Betriebsanleitung Zustimmtaster ZSM
Dok. No.
2098540
Versiyon
07-12/23
Dil
Boyut
0,3 MB
Manual de instruções Chave enable ZSM
Dok. No.
2098540
Versiyon
07-12/23
Dil
Boyut
0,3 MB
Istruzioni di impiego Pulsanti di consenso ZSM
Dok. No.
2098540
Versiyon
07-12/23
Dil
Boyut
0,3 MB
Návod k použití Potvrzovací tlačítka ZSM
Dok. No.
2098540
Versiyon
07-12/23
Dil
Boyut
0,5 MB
Instrucțiuni de utilizare Butoane de activare ZSM
Dok. No.
2098540
Versiyon
07-12/23
Dil
Boyut
0,5 MB
Diğer Belgeler
Approvals and certificates
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,2 MB
Sales documents
Commandes d’Assentiment ZS
Dok. No.
Versiyon
Dil
Boyut
Commandes d’Assentiment ZS
Dok. No.
097367
Versiyon
09-02/21
Dil
Boyut
10,2 MB
Enabling switches ZS
Dok. No.
Versiyon
Dil
Boyut
Enabling switches ZS
Dok. No.
095690
Versiyon
09-02/21
Dil
Boyut
10,1 MB
Zustimmtaster ZS
Dok. No.
Versiyon
Dil
Boyut
Zustimmtaster ZS
Dok. No.
095689
Versiyon
09-02/21
Dil
Boyut
10,2 MB
Sipariş verileri
| Sip. No. | 105075 |
| Makale adı | ZSM2301-105075 |
| Ağırlık | 1,353kg |
| Gümrük sınıfı | 85371098 |
| ECLASS | 27-37-12-38 Agreement switch |
