AnasayfaProductsMultifunctional Gate Box MGBMGB Ethernet/IP™MGB-L2HEB-EIA-L-161480

MGB-L2HEB-EIA-L-161480 (Sip. No. 161480)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Locking set MGB-L2...-EI (guard locking by solenoid force) with 5 control elements, 7/8" and M12 plugs

Guard locking with guard lock monitoring
Emergency stop according to ISO 13850, illuminated
4 illuminated pushbuttons
including adhesive labels
Connection via 7/8" and M12 plugs
including terminal plug for stack light (M12, 5-pin)
Pre-assembled on mounting plates
With escape release
Unicode

MGB-L2HEB-EIA-L-161480 (Sip. No. 161480)

Açıklama

Ethernet/IP connection

7/8" and M12 plugs (d-coded)

Integrated switches

Integrated switches permit linear and DLR network structures

Flexible use as interlocking or guard locking

By means of the corresponding evaluation of the safe device data by the control system, use can be as either interlocking or guard locking (with or without monitoring).

Installation orientation	any
Mechanical life	1 x 10⁶
Ambient temperature	-30 ... +55 °C
Material
Housing	Die-cast zinc/stainless steel, powder-coated

Product version number	V2.0.0
Additional feature	with mounting plate

Installation orientation	Door hinge DIN left
Degree of protection	IP65
Ambient temperature	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Product version number	V3.0.0
Additional feature	with mounting plate

Item	Color	Extras	Switching element	Version
1		with adhesive ring	2 PD	Emergency stop illuminated
90	Red		1NO	Illuminated pushbutton
92	Green		1NO	Illuminated pushbutton
93	Yellow		1NO	Illuminated pushbutton
95	Green		1NO	Illuminated pushbutton

Connecting cable
Ethernet	Ethernet/IP cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Connection type
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X4)
	7/8" Power (X1)
	Plug connector M12 (X6)
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X3)
	7/8" Power (X2)
Installation orientation	Door hinge DIN left
Switching frequency	0.25 Hz
Mechanical life
	1 x 10⁶
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
Response time
Door position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Emergency stop / machine stop	max. 100 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Guard locking	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Open-circuit current principle

Mission time	20 y
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Control of guard locking
Category	4
Performance Level	PL e
PFH_D	4.91 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Emergency stop
B_10D
Emergency stop	0.13 x 10⁶
	Emergency-stop evaluation
Category	4
Performance Level	PL e
PFH_D	3.05 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Monitoring of guard locking and the guard position
Diagnostic Coverage (DC)	99 %
Category	4
Performance Level	PL e
PFH_D	3.37 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)

Bus data protocol	Ethernet/IP
Safety data protocol	CIP Safety
Date interface
Ethernet

Sip. No.	161480
Makale adı	MGB-L2HEB-EIA-L-161480
Ağırlık	6,96kg
Gümrük sınıfı	85371098
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

Secured switch-off distance s_ar
Door position	max. 65 mm

Occupancy diagram
	L1
	B1

MGB-L2HEB-EIA-L-161480 (Sip. No. 161480)

Locking set MGB-L2...-EI (guard locking by solenoid force) with 5 control elements, 7/8" and M12 plugs

Açıklama

Ethernet/IP connection

Escape release

Dimensional drawings

Teknik Veriler

Approvals

Escape release MGB-E-A2-106051 (Order no. 106051)

Mechanical values and environment

Miscellaneous

Handle modules MGB-H-AA1A2-L-106221 (Order no. 106221)

Mechanical values and environment

Miscellaneous

Locking modules MGB-L2B-EIA-L-136525 (Order no. 136525)

Workspace

Operating and display elements

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Interface

Bileşenler

Aksesuar

İndirme

Komple paket

Tek Belgeler

Diğer Belgeler

CAD Verileri

Sipariş verileri

Çerez bildirimi