AnasayfaProductsMultifunctional Gate Box MGBMGB-PNMGB-L2B-PNC-R-114398

MGB-L2B-PNC-R-114398 (Sip. No. 114398)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug, RC12

Guard locking with guard lock monitoring
3 illuminated pushbuttons
including adhesive labels
Push-pull plug
including terminal plug for enabling switch (RC12, 12-pin)
Pre-assembled on mounting plates
Integrated Profinet RT switch
Multicode

Açıklama

Profinet connection

Connection via push-pull plugs according to IEC 61076-3-117

Profinet RT switch

Point-to-point topology network structure due to integrated RT switch.

Flexible use as interlocking or guard locking

By means of the corresponding evaluation of the safe device data by the control system, use can be as either interlocking or guard locking (with or without monitoring).

Item	Color	Switching element	Version
90	Red	1NO	Illuminated pushbutton
91	white	1NO	Illuminated pushbutton
95	Blue	1NO	Illuminated pushbutton

Connecting cable
Ethernet	Profinet I/O cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Multicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Connection type
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45 (X4 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
for enabling switch	Plug connector RC12 (X14)
	Push-pull power (X1 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45 (X3 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
	Push-pull power (X2 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Mechanical life
	1 x 10⁶
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
Response time
Enabling switch	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Guard locking	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Door position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Open-circuit current principle

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	3	4.07x10^-8	4	20 y
Monitoring of guard locking	PL e	3	4.07x10^-8	4	20 y
Evaluating safety signals	PL e	3	4.1x10^-8	4	20 y
Evaluating safety signals	Applies to all additionally included safety functions such as EMERGENCY STOP, enabling switch, etc.

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet

Sip. No.	114398
Makale adı	MGB-L2B-PNC-R-114398
Ağırlık	3,573kg
Gümrük sınıfı	85371098
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

Occupancy diagram
	B1
	L0

MGB-L2B-PNC-R-114398 (Sip. No. 114398)

Evaluation module and bus module MGB-L2...-PN... (guard locking by solenoid force) with 3 control elements, push-pull plug, RC12

Açıklama

Profinet connection

Dimensional drawings

Teknik Veriler

Approvals

Workspace

Operating and display elements

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Interface

Aksesuar

İndirme

Komple paket

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Çerez bildirimi