AnasayfaProductsPosition switches and multiple limit switchesMultiple limit switch, upright SNSN02D12-1508AM-M

SN02D12-1508AM-M (Sip. No. 086591)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Series SN...AM, 12 mm, mechanical, with exterior diaphragm

With exterior diaphragm
Plunger spacing 12 mm
Upright housing, small flange
Degree of protection IP67 according to IEC 60529

Açıklama

Exterior diaphragm

The exterior diaphragm protects the plunger guide against the entry of very fine dust (dust from grinding, casting, glass, etc.) and prevents the plunger from seizing. At the same time, plunger sticking, caused by resinous lubricating coolants, can be prevented with this exterior diaphragm version.

Switching elements

ES 502 E	Snap-action switching contact 1 NC + 1 NO
ES 508	Slow-action switching contact 1 NC

On the usage of safety switching elements, the dog distance must be maintained to achieve the positively driven travel. The dogs must be positively mounted according to EN ISO 14119, i.e. riveted, welded or secured in some other way against becoming loose.

*	Safety switching element ES 508E positively driven. Positive opening function is dependent on maintaining this distance.
1	Operating point
2	Free position
3	Dog
4	n Number of plungers
5	Actuators (dogs) must be connected to the machine in a flush position.
6	Switch can be replaced only with the same type.

Connection cross section	0.34 ... 1.5 mm²
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	2.5 kV
Utilization category
AC-12 Switching element ES502E	8 A 250 V
AC-15	6 A 230 V
DC-13	6 A 24 V
Short circuit protection according to IEC 60269-1	8A gG
Switching current
min. at DC 24V, switching element ES508	min. 10 mA (applies to station 1)
min. at DC 12V, switching element ES502E	min. 10 mA (applies from station 2)
thermal rated current I_th	8 A

Approach speed	0.01 ... 20 m/min
Connection type	2 x M20 x 1.5
Number NC contacts	1
Number of switching elements	2
Number of NO contacts	1
Number of positively driven contacts	1
Design	upright
Actuating element	Chisel plunger
Actuating force	min. 20 N
Installation orientation	any
Mechanical life	30 x 10⁶
Contact bounce time	max. 3 ms (applies from station 2)
Switching principle
Switching element ES502E	Snap-action switching contact (applies from station 2)
Switching element ES508	Slow-action switching contact (applies to station 1)
Operating point accuracy	± 0,002 (The reproducible operating point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2,000 operating cycles.)
Schließzeit
Switching element ES502E	max. 4 ms
Degree of protection	IP67
Plunger spacing	12 mm
Ambient temperature	-5 ... +80 °C
Material
Contact	Silver alloy, gold flashed
Housing	Die-cast aluminum, anodized

Additional information
	Exterior diaphragm = AM (The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)
	Mixed contact assembly (On upright multiple limit switches, it is necessary to start with the safety station/s from the flange side. If several safety stations are to be installed, these must be installed directly one after the other.)

Sip. No.	086591
Makale adı	SN02D12-1508AM-M
Ağırlık	0,318kg
Gümrük sınıfı	85365019000
ECLASS	27-27-06-02 Multi-position switch

SN02D12-1508AM-M (Sip. No. 086591)

Series SN...AM, 12 mm, mechanical, with exterior diaphragm

Açıklama

Exterior diaphragm

Switching elements

LED function display (on request)

Dimensional drawings

Connection examples

Connection examples

Teknik Veriler

Approvals

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

İndirme

Komple paket

Tek Belgeler

Diğer Belgeler

CAD Verileri

Sipariş verileri

Çerez bildirimi