Safety switch TZ ASi, plug connector M12 (closed-circuit current principle)
- Auxiliary release on the front
- Actuating head fitted left
- Plug connector M12
![TZ1LE024SEM4AS1 (Sip. No. 086140)](https://assets2.euchner.de/files/51/02/ast_735102_xl.png)
Açıklama
Guard locking type
TZ1 | Closed-circuit current principle, guard locking by spring force. Release by control of AS-i output 0. |
Control of the guard locking solenoid
The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0. In addition, the 24V connection can be switched safely.
AS-Interface inputs
D0, D1 | Door monitoring contact SK |
D2, D3 | Solenoid monitoring contact ÜK |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D0 | Guard locking solenoid |
D1 | LED red |
D2 | LED green |
LED function display
- The Power LED indicates the operating voltage on the bus.
- The Fault LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Auxiliary release
This is used for releasing the guard locking with the aid of a tool. A seal and auxiliary tool are fitted to protect against tampering.
Dimensional drawings
![Dimensional drawings](https://assets2.euchner.de/files/44/31/ast_634431.png)
1 | Auxiliary release |
2 | Plug connector not aligned |
a | Travel without operation: actuator is in the guide slot, but function is not triggered. |
b | Switching operation completed. Actuator must be inserted to this point to ensure safe switching. The actuator must be withdrawn at least to point a for switching off. |
Connection examples
![Connection examples](https://assets2.euchner.de/files/46/23/ast_654623.png)
View of plug side |
Teknik Veriler
Approvals
![EAC_RU C-DE.MO05.B.00971/20](https://assets2.euchner.de/files/06/97/ast_630697_m.png)
![DNV-GL_TAA0000172 Rev. 1](https://assets2.euchner.de/files/07/53/ast_630753_m.png)
![DGUV_TZ_ET 24013_ET 24014](https://assets2.euchner.de/files/08/40/ast_630840_m.png)
![c_UL_us_E155795_2/5](https://assets2.euchner.de/files/82/74/ast_628274_m.png)
![CCC_2020980305000541_CQC2008010305306207](https://assets2.euchner.de/files/07/52/ast_630752_m.png)
![Asi Interface_56201_](https://assets2.euchner.de/files/08/38/ast_630838_m.png)
Electrical connection values
ASI operating current | max. 45 mA |
ASI data in | |
according to AS-i Safety at Work | D0, D1, D2, D3 (see positively driven contact) |
ASI data out | |
Guard locking solenoid | D0 (1 = Solenoid energized) |
LED green | D2 (1 = LED on) |
LED red | D1 (1 = LED on) |
ASI auxiliary voltage | |
IEC 60742, PELV | 24 V -15% ... +10% |
ASI auxiliary current | 350 mA |
ASI-LED | |
LED green | Power (ASI voltage present) |
LED red | Fault (Offline phase or address 0) |
ASI slave type | |
according to ASI specification 2.1 | EA code: 7 |
according to ASI specification 2.1 | ID code: B |
ASI voltage | 22.5 ... 30 ... 31.6 V |
Solenoid duty cycle | 100 % |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | |
Actuating head left | C |
Connection type | |
1 x | Plug connector M12 (4-pin) |
Number of door position positively driven contacts | |
according to AS-i Safety at Work | |
Number of guard lock monitoring positively driven contacts | |
according to AS-i Safety at Work | 1 D2,D3 (1 = locked) |
Extraction force | 30 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 35 N |
Installation orientation | any |
Insertion depth | 52 mm |
Mechanical life | 1 x 10⁶ |
Retention force | 10 N |
Switching principle | Slow-action switching contact |
Degree of protection | IP67 |
Ambient temperature | -25 ... +55 °C |
Material | |
Contact | Silver alloy, gold flashed |
Housing | Anodized die-cast alloy |
Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of the guard position | 3x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V | ||
Monitoring of guard locking | 3x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
In combination with actuator ACTUATOR-Z-GN
Overtravel | 16 mm |
In combination with actuator ACTUATOR-Z-G
Overtravel | 4 mm |
Aksesuar
![BETAETIGER-Z-G](https://assets2.euchner.de/files/54/24/ast_735424_xs.png)
BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator
![BETAETIGER-Z-G/V25](https://assets2.euchner.de/files/54/24/ast_735424_xs.png)
BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces
![BETAETIGER-Z-GN](https://assets2.euchner.de/files/43/01/ast_664301_xs.png)
BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator
![BETAETIGER-Z-GME](https://assets2.euchner.de/files/42/99/ast_664299_xs.png)
BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator
![RIEGEL TZ-C-NIRO](https://assets2.euchner.de/files/74/84/ast_737484_xs.png)
RIEGEL TZ-C-NIRO
- Stainless steel bolt
- For doors hinged on the left
- Suitable for a door gap of approx. 15 mm
![RIEGEL TZ-C-NIRO-C2101](https://assets2.euchner.de/files/75/97/ast_737597_xs.png)
RIEGEL TZ-C-NIRO-C2101
- Stainless steel bolt
- For doors hinged on the left
- Can be locked in open position with padlocks
- Actuator and switch bracket included
- Bolt for safety switch TZ
- Suitable for a door gap of approx. 15 mm
![RIEGEL NZ/TZ-S1](https://assets2.euchner.de/files/74/74/ast_737474_xs.png)
RIEGEL NZ/TZ-S1
- Aluminum bolt
- For doors hinged on the left or right. Cone grip bottom.
- Spring catch in open position
- Can be locked in open position with padlocks
- Actuator included
![RIEGEL NZ/TZ-S2](https://assets2.euchner.de/files/73/96/ast_737396_xs.png)
RIEGEL NZ/TZ-S2
- Aluminum bolt
- For doors hinged on the left or right. Cone grip top.
- Spring catch in open position
- Can be locked in open position with padlocks
- Actuator included
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
![Dok. No. EDC2539628](https://assets2.euchner.de/files/33/55/ast_2263355_thumb.jpg)
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
![Dok. No. EDC2539628](https://assets2.euchner.de/files/33/57/ast_2263357_thumb.jpg)
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
![Dok. No. EDC20001551](https://assets2.euchner.de/files/97/28/ast_2329728_thumb.jpg)
![Dok. No. 2086963](https://assets2.euchner.de/files/14/88/ast_3171488_thumb.jpg)
Mode d’emploi Interrupteur de sécurité TZ…AS1
Betriebsanleitung Sicherheitsschalter TZ…AS1
Istruzioni di impiego Finecorsa di sicurezza TZ…AS1
![Dok. No. 2086963](https://assets2.euchner.de/files/93/54/ast_3129354_thumb.jpg)
![Dok. No. 2086963](https://assets2.euchner.de/files/14/87/ast_3171487_thumb.jpg)
Diğer Belgeler
![Dok. No.](https://assets2.euchner.de/files/31/27/ast_743127_thumb.jpg)
![Dok. No.](https://assets2.euchner.de/files/30/39/ast_3293039_thumb.jpg)
![Dok. No.](https://assets2.euchner.de/files/68/20/ast_2576820_thumb.jpg)
![Dok. No.](https://assets2.euchner.de/files/33/76/ast_743376_thumb.jpg)
![Dok. No. 112564](https://assets2.euchner.de/files/06/56/ast_1650656_thumb.jpg)
CAD Verileri
Sipariş verileri
Sip. No. | 086140 |
Makale adı | TZ1LE024SEM4AS1 |
Ağırlık | 1,199kg |
Gümrük sınıfı | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |