ESM-BA201 (Sip. No. 085610)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Basic device ESM-BA2.., 2 safety contacts, cat. 4

The outputs are electrically decoupled and of redundant design.

By using suitable wiring, the following functions can be selected:

Short circuit monitoring to detect short circuits between the connecting cables and to shut down the outputs or prevent relay starting if necessary

Earth fault/ground fault monitoring to detect short circuits between the connecting cables and earth or ground and to shut down the outputs or prevent relay starting if necessary.

Optionally, the ESM-BA... devices are also available as version with plug-in connection terminals.

ESM-BA2...

Housing material
Housing	Polyamide PA6.6
Weight
Net	0,23 kg
Ambient temperature
At U_B = 24V AC	-15 ... 40 °C
At U_B = 24V DC	-15 ... 60 °C (at 20% undervoltage T<sub>max</sub>: 50°C)
Degree of protection	IP20
Mechanical life
operating cycles	10 x 10⁶
Contact material	AgSnO₂
Mounting method	Mounting rail 35mm according to DIN EN 60715 TH35
Connection	Connection terminals
Length of control cable
With conductor cross-section 0.75mm²	1000 m
	Safety contacts 13/14, 23/24
Number of safety contacts	2

Operating voltage
AC/DC	24 V -10% ... +10% (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp
Leakage path/air gaps	4 kV
Overvoltage category according to IEC EN 60664-1	3
Reverse polarity protection
On version U_B =24V DC
Connection rating
at 24V DC	1,5 W
Degree of contamination (external, according to EN 60947-1)	2
Connection cross-section	0,14 ... 2,5 mm² (Connection terminal (size))
Test voltage
Control system/contacts	2,5 kV
Control voltage
On S11	24 V 18,6 ... 26 V Start button
Control current
S11...S14	40 mA
LED indicator	2 status displays (green) for relays K1 and K2
	Safety contacts 13/14, 23/24
Type of output
NO	Relay contacts, floating and positively driven (redundant) (Positively driven relay according to EN 50205)
Switching voltage
AC	max.250 V
DC	max.24 V
Switching current	min.20 mA at 24V
Fusing
External contact fuses (safety circuit) according to IEC 60269-1	10A gG
Utilization category acc. to EN 60947-5-1
AC-15	3A, 250V
DC-13	3A, 24V
AC-12	6A ohmic load, 250V (6 operating cycles/min.)
DC-12	6A ohmic load, 24V (6 operating cycles/min.)
Breaking capacity according to UL	6A 250V AC / 2A 24V DC per contact

In compliance with	EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN 50581: 2012 (RoHS)

In compliance with

EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN 50581: 2012 (RoHS)

Performance Level	PL e (This value is dependent on the number of switching cycles and the switching current.)
Category	4 (This value is dependent on the number of switching cycles and the switching current.)
PFH_D	1.2 x 10^-8 (This value is dependent on the number of switching cycles and the switching current.)
Number of switching cycles
≤ 1 A at 24 V DC	max.100000 1/Jahr
≤ 3 A at 24 V DC	max.22500 1/Jahr
≤ 0.1 A at 24 V DC	max.400000 1/Jahr
Mission time	20 y (This value is dependent on the number of switching cycles and the switching current.)

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
Kullanım talimatlarını tamamlayan tüm veri sayfaları
Uygunluk beyanı