Read head CEM-A-LE05H-S2... with guard locking without guard lock monitoring with adjustable adhesive force
- Read head with guard locking without guard lock monitoring
- Locking force 650 N
- Adjustable adhesive force
- Up to category 4 according to EN ISO 13849-1
- Two safety screws M5x16 included
Açıklama
Combination options
Suitable for connection to a CES-AZ evaluation unit
Adjustable adhesive force
This version has an adhesive force also with the guard locking switched off. In this way it is intended, for example, to prevent the safety door from opening due to vibration or similar. The adhesive force can be adjusted using a programming adapter to 70 N, 110 N or 150 N.
Important: To change the preset adhesive force, you will need a programming adapter.
Approach direction
Typical actuating range
Note assured release distance sar = 20 mm for internal component failure. Safety outputs are safely switched off.
Dimensional drawings
Connection examples
Connection examples
CES evaluation unit | |
X1.1 | U |
X1.2 | NC |
X1.3 | 0 V/GND |
X1.4 | Functional earth |
X3.1 | Data line |
X3.3 | Data line |
X3.4 | SH (screen) |
Teknik Veriler
Approvals
Workspace
Secured switch-off distance sar | max. 20 mm (in combination with evaluation unit CES-A-...B or CES-AZ-...B) |
Secured switching distance sao | |
with center offset m=0 | 0 mm (in combination with evaluation unit CES-A-...B or CES-AZ-...B) |
Center offset | -2.5 ... +2.5 mm |
Switching hysteresis | |
with center offset m=0 | 0.7 mm (in combination with evaluation unit CES-A-...B or CES-AZ-...B) |
Electrical connection values
Power consumption | 2.8 W |
Operating voltage DC | |
UCM | 24 V DC -15% V DC ... +10% V DC |
UB | 24 V DC -15% ... +10% |
Solenoid duty cycle | 100 % |
Current consumption | |
at UB at UCM=0 V | 25 mA |
at UB at UCM=24 V | 100 mA |
at UCM at 24 V | 10 mA |
Mechanical values and environment
Connection type | |
X1, solenoid (yellow LED integrated in the plug) | Plug connector M8x1, 4-pin, plug (with snap-action/screw terminal) |
X3, read head | Plug connector M8x1, 3-pin, plug (with snap-action/screw terminal) |
Installation orientation | any |
Switching frequency | |
Solenoid | max. 1 Hz |
Adhesive force | |
adjustable | 70/110/150 (Delivery state 110 N) N |
Cable length | max. 25 m |
Mechanical life | |
in case of use as door stop, and 1 Joule impact energy | 1 x 10⁶ |
Degree of protection | IP67 |
Ambient temperature | -25 ... +50 °C |
Material | |
Solenoid | Steel, nickel plated |
Housing | Die-cast aluminum |
Read head | Plastic (PPS) |
Locking force F | |
(not monitored, in axial direction) at UCM=24 V | 650 N |
Guard locking principle | Open-circuit current principle |
Aksesuar
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Mode d'emploi Tête de lecture CEM-A-LE05H-S2
Manual de instrucciones Cabeza de lectura CEM-A-LE05H-S2
Betriebsanleitung Lesekopf CEM-A-LE05H-S2
Diğer Belgeler
Sipariş verileri
Sip. No. | 104606 |
Makale adı | CEM-A-LE05H-S2-104606 |
Ağırlık | 0,432kg |
Gümrük sınıfı | 85365019000 |
ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |